- Torque wrench designed for Mark 4-style rings
- Lets you both tighten and loosen mounting screws
- Delivers required 65 inch-pounds of torque
- Produces correct return-to-zero accuracy
- Carries Leupold's full lifetime guarantee
Product Description
With this special wrench you can not only tighten, but loosen the mounting screws on Mark 4® style rings. Delivers the proper amount of torque (65-in lbs) when installing Mark 4 style rings for return to zero accuracy.Amazon.com Product Description
The right tool makes even the most difficult or tedious job easier. Enter the Leupold Mark 4 torque wrench, which lets you not only tighten but also loosen the mounting screws on Mark 4-style rings. The wrench... More >>
Leupold Mark 4 Torque Wrench 48701
Related posts:
I recently purchased a Remington 700 5R .308 and equipped it with a Leupold Mark 4 6.5-20 x 50mm LR/T scope. The scope is mounted on a NightForce one piece 20 MOA short action base and NightForce Rings. NightForce recommends that you tighten their rings to 68 inch/lbs but I think it is just a gimmick to get you to buy something that they sell. The Leupold Mark 4 Torque Wrench is set to 65 inch/lbs and I believe it will hold just fine. Both the Leupold and the NightForce torque wrenches are made by Seekonk so there is no difference in quality. Another reason to go with the 65 inch/lbs torque wrench is if you ever need to switch out stocks, most are set to the 65 inch/lbs recommendation.
Rating: 5 / 5